Characteristics of reproductive tract infections caused by common pathogens among the outpatients of reproductive medicine center in Putian: retrospective study.

BACKGROUND: This study aims to explore the infection and age distribution of Ureaplasma urealyticum (UU), Chlamydia trachomatis (CT), Neisseria gonorrhoeae (NG) and Herpes simplex virus type II (HSV II) among the outpatients of Reproductive Medicine Center in Putian, Fujian Province to provide a clinical basis for the early diagnosis and treatment of various reproductive tract diseases and infertility in this region. METHODS: A total of 1736 samples of secretions and exfoliated cervical cells were collected from the outpatients of the Reproductive Medicine Center of the Affiliated Hospital of Putian University from December 2021 to April 2023. The infections of UU, CT, NG and HSVII were detected by real-time fluorescence polymerase chain reaction (PCR), and the infection statuses of the patients with different genders, ages and diagnoses were analysed. RESULTS: Among the 1736 patients, 611 were male and 1125 were female. The male patients had higher UU infection rate but lower HSV II infection rate than the female patients. No significant difference in CT and NG infection rates was observed between the genders. The CT infection rate gradually decreased with the increase in the age. The difference in UU, NG and HSV II infection rates among the different age groups was not statistically significant. For UU infection, the male infertile patients had the highest rate of 37.72% (172/456). Meanwhile, the differences in CT, NG and HSV II infection rates among the different diagnosis groups were not statistically significant. Among the male and female infertile patients, the CT infection rate was the highest in the 21-25 years of age group at 11.11% (2/18) and 9.47% (9/95), respectively. No statistically significant difference in UU, CT, NG and HSV II infection rates was observed among the different age groups of patients diagnosed in relation to the family planning guidance and between the male and female patients with other diagnoses results. CONCLUSIONS: This study showed that UU was the most frequently identified pathogen in infertile men in Putian, Fujian Province. The CT infection rate was the highest in people under 20 years old, and the infection showed a tendency toward young individuals. Therefore, the publicity of sexual health knowledge must be strengthened, and the prevention and treatment of venereal diseases among young and middle-aged people must be improved. Moreover, the pathogen infection is related to infertility to a certain extent, which is conducive to clinical diagnosis and treatment.

Recent Advances in Nanotechnology-Based Strategies for Bone Tuberculosis Management.

Bone tuberculosis, an extrapulmonary manifestation of tuberculosis, presents unique treatment challenges, including its insidious onset and complex pathology. While advancements in anti-tubercular therapy have been made, the efficacy is often limited by difficulties in achieving targeted drug concentrations and avoiding systemic toxicity. The intricate bone structure and presence of granulomas further impede effective drug delivery. Nano-drug delivery systems have emerged as a promising alternative, offering the enhanced targeting of anti-tubercular drugs. These systems, characterized by their minute size and adaptable surface properties, can be tailored to improve drug solubility, stability, and bioavailability, while also responding to specific stimuli within the bone TB microenvironment for controlled drug release. Nano-drug delivery systems can encapsulate drugs for precise delivery to the infection site. A significant innovation is their integration with prosthetics or biomaterials, which aids in both drug delivery and bone reconstruction, addressing the infection and its osteological consequences. This review provides a comprehensive overview of the pathophysiology of bone tuberculosis and its current treatments, emphasizing their limitations. It then delves into the advancements in nano-drug delivery systems, discussing their design, functionality, and role in bone TB therapy. The review assesses their potential in preclinical research, particularly in targeted drug delivery, treatment efficacy, and a reduction of side effects. Finally, it highlights the transformative promise of nanotechnology in bone TB treatments and suggests future research directions in this evolving field.

Comparative evaluation of multi-fold rib and structural iliac bone grafts in single-segment thoracic and thoracolumbar spinal tuberculosis: clinical and radiological outcomes.

OBJECTIVE: To compare clinical and radiological outcomes of multi-fold rib and structural iliac bone grafts, the primary autologous graft techniques in anterolateral-only surgery for single-segment thoracic and thoracolumbar spinal tuberculosis. METHODS: This retrospective study included 99 patients treated from January 2014 to March 2022, categorized into 64 with multi-fold rib grafts (group A) and 35 with structural iliac bone grafts (group B). Outcomes assessed included hospital stay, operation time, intraoperative blood loss, postoperative drainage, complications, erythrocyte sedimentation rate (ESR), C-reactive protein (CRP), the Visual Analog Scale (VAS) for pain, the Oswestry Disability Index (ODI), bone fusion time, and the American Spinal Injury Association (ASIA) impairment scale grade. Segmental kyphotic angle and intervertebral height were measured radiologically before surgery and follow-up. RESULTS: The mean follow-up was 63.50 ± 26.05 months for group A and 64.97 ± 26.43 months for group B (P > 0.05). All patients had achieved a clinical cure. Group A had a shorter operation time (P = 0.004). Within one week post-surgery, group B reported higher VAS scores (P < 0.0001). Neurological performance and quality of life significantly improved in both groups. No significant differences were observed in segmental kyphotic angle and intervertebral height between the groups pre- and postoperatively (P > 0.05). However, group A showed a greater segmental kyphotic angle at the final follow-up, while group B had better maintenance of kyphotic angle correction and intervertebral height (P < 0.05). Bone fusion was achieved in all patients without differences in fusion time (P > 0.05). CONCLUSIONS: Multi-fold rib grafts resulted in shorter operation times and less postoperative pain, while structural iliac bone grafts provided better long-term maintenance of spinal alignment and stability, suggesting their use in cases where long-term outcomes are critical.

Gas-Source Comparison and Hydrocarbon Generation and Expulsion Histories of the Main Source Rocks of the Middle Jurassic Shaximiao Formation, Western Sichuan Basin.

With the discovery and exploration of tight sandstone gas reservoirs in the Sichuan Basin, the Middle Jurassic Shaximiao Formation has gradually become the focus of exploration. However, the gas source of the Shaximiao Formation in the Western Sichuan Basin is still controversial, and research on the hydrocarbon generation and expulsion histories of the primary source rocks lags behind, which restricts the study of tight sandstone gas reservoir dynamics within the Shaximiao Formation in the Western Sichuan Basin and further affects the oil and gas exploration process. This paper, utilizing geochemical parameters, including 82 natural gas components and 68 carbon isotopes, conducted an investigation into the origin identification of natural gas and gas-source comparisons within the Shaximiao Formation in the Western Sichuan Basin. By utilizing basin modeling technology, we reconstructed the histories of hydrocarbon generation and expulsion of the primary source rocks and identified the potential exploration areas. The findings indicate that the natural gas within the Shaximiao Formation in the Western Sichuan Basin is characterized by a typical high-maturity wet gas-dry gas reservoir. It is a thermogenic coal-type gas produced by kerogen cracking, and the gas source is primarily type-III kerogen. The main source of natural gas is the coal-measure source rock of the Upper Triassic Xujiahe 5 Formation, which has mainly experienced two stages of increasing maturity, characterized by "two stages of gas generation and one stage of gas expulsion". The hydrocarbon generation and expulsion histories for the source rocks within the Xujiahe 5 Formation is shown as follows: the source rocks of the Xujiahe 5 Formation reached the hydrocarbon generation threshold by the end of the Early Jurassic and peaked in hydrocarbon generation by the end of the Late Jurassic, and then the natural gas migrated to the paleostructural highs of the Shaximiao Formation to form the paleo-gas reservoir. From the end of the Early Cretaceous, the paleo-gas reservoir underwent adjustments and transformations to evolve into the present-day gas reservoir. The source rocks exhibit substantial potential for the forming of large-medium and extralarge gas fields, with favorable exploration zones concentrated in the southern and central portions of the study area. The research findings can provide a scientific foundation for the next exploration and deployment of natural gas resources within the Shaximiao Formation in the Western Sichuan Basin.

Tetrahedral Framework Nuclear Acids Can Regulate Interleukin-17 Pathway to Alleviate Inflammation and Inhibit Heterotopic Ossification in Ankylosing Spondylitis.

Ankylosing spondylitis (AS) is a chronic systemic inflammatory disease that leads to serious spinal deformity and ankylosis. Persistent inflammation and progressive ankylosis lead to loss of spinal flexibility in patients with AS. Tetrahedral framework nucleic acids (tFNAs) have emerged as a one kind of nanomaterial composed of four specially designed complementary DNA single strands with outstanding biological properties. Results from in vivo experiments demonstrated that tFNAs treatment could inhibit inflammatory responses and heterotopic ossification to halt disease progression. In vitro, tFNAs were proved to influence the biological behavior of AS primary chondrocytes and inhibit the secretion of pro-inflammatory cytokines through interleukin-17 pathway. The osteogenic process of chondrocytes was as well inhibited at the transcriptional level to regulate the expression of related proteins. Therefore, we believe tFNAs had a strong therapeutic effect and could serve as a nonsurgical remedy in the future to help patients suffering from AS.

The Influence of Screw Positioning on Cage Subsidence in Patients with Oblique Lumbar Interbody Fusion Combined with Anterolateral Fixation.

OBJECTIVES: Cage subsidence (CS) has been reported to be one of the most common complications following oblique lumbar interbody fusion (OLIF). To reduce the incidence of CS and improve intervertebral fusion rates, anterolateral fixation (AF) has been gradually proposed. However, the incidence of CS in patients with oblique lumbar interbody fusion combined with anterolateral fixation (OLIF-AF) is still controversial. Additionally, there is a lack of consensus regarding the optimal placement of screws for OLIF-AF, and the impact of screw placement on the incidence of CS has yet to be thoroughly investigated and validated. The objective of this investigation was to examine the correlation between screw placements and CS and to establish an optimized approach for implantation in OLIF-AF. METHODS: A retrospective cohort study was undertaken. From October 2017 to December 2020, a total of 103 patients who received L4/5 OLIF-AF for lumbar spinal stenosis or spondylolisthesis or degenerative instability in our department were followed up for more than 12 months. Demographic and radiographic data of these patients were collected. Additionally, screw placement related parameters, including trajectory and position, were measured by anterior-posterior X-ray and axial CT. Analysis was done by chi-square, independent t-test, univariable and multivariable binary logistic regression to explore the correlation between screw placements and CS. Finally, the receiver operating characteristic (ROC) curve analysis was used to evaluate the predictive ability of screw placement-related parameters. RESULTS: A total of 103 patients were included, and CS was found in 28 (27.18%) patients. Univariable analysis was firstly performed for each parameter. Next, variables with p-value of <0.05, including bone mineral density (BMD), concave morphology, and screw placement-related parameters were included in the multivariate logistic regression analysis. Significant predictor factors for subsidence were coronal plane angle (CPA) (OR 0.580 ± 0.208, 95% CI 1.187-2.684), implantation point (IP) (L4) (OR 5.732 ± 2.737, 95% CI 1.445-12.166), and IP (L5) (OR 7.160 ± 3.480, 95% CI 1.405-28.683). Furthermore, ROC curves showed that the predictive accuracy of CS was 88.1% for CPA, 77.6% for IP (L4) and 80.9% for IP (L5). CONCLUSIONS: We demonstrate that the trajectory of vertebral screws, including angle and position, was closely related to CS. Inserting screws parallel to each other and as close to the endplate as possible while keeping the cage inside the range of the superior and inferior screws are an optimal implantation strategy for OLIF-AF.

Physiological response and molecular mechanisms against UV-B radiation in Brachionus asplanchnoidis (Rotifera).

Ultraviolet B (UV-B, 280-320 nm) radiation is a major environmental stressor for aquatic organisms on Earth's surface. Its effects on biological systems are well known, but the mechanisms by which organisms respond and adapt to UV-B radiation are still being explored. In this study, we investigated the effects of UV-B radiation on the monogonont rotifer Brachionus asplanchnoidis, focusing on physiological parameters, antioxidant systems, DNA damage, and DNA repair-related molecular mechanism. Our results showed that the LD50 was at 28.53 kJ/m2, indicating strong tolerance to UV-B. However, UV-B radiation caused adverse effects on growth and reproduction, with shortened reproductive period and longevity, decreased fecundity and hatchability, and inhibition of population growth. Biochemical analyses revealed severe oxidative damage and lipid peroxidation, with increased ROS and MDA levels. Activities of antioxidant enzymes were highly induced at low doses but decreased at high doses. DNA damage also occurred in UV-B-exposed rotifers. Furthermore, selected DNA repair-related genes were up-regulated in a dose-dependent manner. These findings provide a comprehensive understanding of the effects of UV-B radiation on rotifers and highlight the importance of considering both ecological and molecular responses in assessing the impact of UV-B radiation on aquatic organisms.

Comparison of predictive performance for cage subsidence between CT-based Hounsfield units and MRI-based vertebral bone quality score following oblique lumbar interbody fusion.

OBJECTIVE: To compare the predictive performance between CT-based Hounsfield units (HU) and MRI-based vertebral bone quality (VBQ) for cage subsidence (CS) following oblique lumbar interbody fusion combined with anterolateral single-rod screw fixation (OLIF-AF). METHODS: A retrospective study was performed on consecutive patients who underwent OLIF-AF at our institution from 2018 to 2020. CS was determined by CT according to the change in the midpoint intervertebral space height. The VBQ score and HU value were measured from preoperative MRI and CT, respectively. Then, we evaluated the predictive performance of those two parameters by comparing the receiver operating characteristic (ROC) curves. RESULTS: The mean global and segmental VBQ scores were significantly higher in the CS group, and the mean global and segmental HU values were significantly lower in the CS group. The area under the curve (AUC) of CS prediction was higher in the operative segments' VBQ score and HU value than the measurement in the global lumbar spine. Finally, the combined segmental VBQ score and segmental HU value demonstrated the highest AUC. CONCLUSION: Both MRI-based VBQ score and CT-based HU value can achieve accurate CS prediction. Moreover, the combination of those two measurements indicated the best predictive performance. CLINICAL RELEVANCE STATEMENT: Both MRI-based VBQ score and CT-based HU value can be used for cage subsidence prediction, in order to take preventive measures early enough. KEY POINTS: • Osteoporosis is a risk factor for CS, both MRI-based VBQ score and CT-based HU value are important predictors during vertebral bone quality evaluation. • The VBQ score and HU value measured in the operative segments are better predictors of CS than the measurement in the global lumbar spine. • Combined segmental VBQ score and segmental HU value achieved the best predictive performance for CS.

Tetrahedral Framework Nucleic Acids Inhibit Muscular Mitochondria-Mediated Apoptosis and Ameliorate Muscle Atrophy in Sarcopenia.

Sarcopenia is known as age-related muscle atrophy, which influences over a quarter of the elderly population worldwide. It is characterized by a progressive decline in muscle mass, strength, and performance. To date, clinical treatments in sarcopenia are limited to rehabilitative interventions and dietary supplements. Tetrahedral framework nucleic acids (tFNAs) represent a novel kind of DNA-based nanomaterial with superior antiapoptosis capacity in cells, tissues, organs, and systems. In our study, the therapeutic effect of tFNAs treatment on sarcopenia was evaluated both in vivo and in vitro. Results from muscular biophysiological characteristics demonstrated significant improvement in muscle function and endurance in the aged mouse model, and histologic examinations also showed beneficial morphological changes in muscle fibers. In vitro, DEX-induced sarcopenic myotube atrophy was also ameliorated through the inhibition of mitochondria-mediated cell apoptosis. Collectively, tFNAs treatment might serve as an alternative option to deal with sarcopenia in the near future.

Hydrocarbon Generation and Expulsion Histories of the Upper Permian Longtan Formation in the Eastern Sichuan Basin, Southwest China.

The Upper Permian Longtan Formation is the main source rock of the Lower Triassic Jialingjiang Formation in the Eastern Sichuan Basin, Southwest China. However, studies of its maturity evolution and oil generation and expulsion histories are lacking, which are not conducive to the accumulation dynamics of the Jialingjiang Formation in the Eastern Sichuan Basin. Based on the study of tectono-thermal history and geochemical parameter data of the source rock, this paper uses basin modeling technology to simulate the maturity evolution and hydrocarbon generation and expulsion histories of the Upper Permian Longtan Formation in the Eastern Sichuan Basin. The results show that the Longtan Formation source rock in the Eastern Sichuan Basin entered the oil generation threshold at the middle stage of the Early Jurassic and reached the high-maturity stage in the north and central regions at the late stage of the Early Jurassic, and the maturity did not increase after the late stage of the Middle Jurassic. The source rock had the characteristic of "one-stage oil generation and one-stage oil expulsion"; the corresponding period of high oil expulsion was 182-174 Ma (the late stage of the Early Jurassic), which was later than the formation time of the trap of the Jialingjiang Formation, possibly providing oil sources for the paleo-oil reservoirs of the Jialingjiang Formation. The results are of great significance to the gas accumulation process and exploration decision-making in the Eastern Sichuan Basin.

Personalized Interventional Surgery of the Lumbar Spine: A Perspective on Minimally Invasive and Neuroendoscopic Decompression for Spinal Stenosis.

Pain generator-based lumbar spinal decompression surgery is the backbone of modern spine care. In contrast to traditional image-based medical necessity criteria for spinal surgery, assessing the severity of neural element encroachment, instability, and deformity, staged management of common painful degenerative lumbar spine conditions is likely to be more durable and cost-effective. Targeting validated pain generators can be accomplished with simplified decompression procedures associated with lower perioperative complications and long-term revision rates. In this perspective article, the authors summarize the current concepts of successful management of spinal stenosis patients with modern transforaminal endoscopic and translaminar minimally invasive spinal surgery techniques. They represent the consensus statements of 14 international surgeon societies, who have worked in collaborative teams in an open peer-review model based on a systematic review of the existing literature and grading the strength of its clinical evidence. The authors found that personalized clinical care protocols for lumbar spinal stenosis rooted in validated pain generators can successfully treat most patients with sciatica-type back and leg pain including those who fail to meet traditional image-based medical necessity criteria for surgery since nearly half of the surgically treated pain generators are not shown on the preoperative MRI scan. Common pain generators in the lumbar spine include (a) an inflamed disc, (b) an inflamed nerve, (c) a hypervascular scar, (d) a hypertrophied superior articular process (SAP) and ligamentum flavum, (e) a tender capsule, (f) an impacting facet margin, (g) a superior foraminal facet osteophyte and cyst, (h) a superior foraminal ligament impingement, (i) a hidden shoulder osteophyte. The position of the key opinion authors of the perspective article is that further clinical research will continue to validate pain generator-based treatment protocols for lumbar spinal stenosis. The endoscopic technology platform enables spine surgeons to directly visualize pain generators, forming the basis for more simplified targeted surgical pain management therapies. Limitations of this care model are dictated by appropriate patient selection and mastering the learning curve of modern MIS procedures. Decompensated deformity and instability will likely continue to be treated with open corrective surgery. Vertically integrated outpatient spine care programs are the most suitable setting for executing such pain generator-focused programs.

[Development and validation of an automatic diagnostic tool for lumbar stability based on deep learning].

Objective: To develop an automatic diagnostic tool based on deep learning for lumbar spine stability and validate diagnostic accuracy. Methods: Preoperative lumbar hyper-flexion and hyper-extension X-ray films were collected from 153 patients with lumbar disease. The following 5 key points were marked by 3 orthopedic surgeons: L4 posteroinferior, anterior inferior angles as well as L5 posterosuperior, anterior superior, and posterior inferior angles. The labeling results of each surgeon were preserved independently, and a total of three sets of labeling results were obtained. A total of 306 lumbar X-ray films were randomly divided into training (n=156), validation (n=50), and test (n=100) sets in a ratio of 3∶1∶2. A new neural network architecture, Swin-PGNet was proposed, which was trained using annotated radiograph images to automatically locate the lumbar vertebral key points and calculate L4, 5 intervertebral Cobb angle and L4 lumbar sliding distance through the predicted key points. The mean error and intra-class correlation coefficient (ICC) were used as an evaluation index, to compare the differences between surgeons' annotations and Swin-PGNet on the three tasks (key point positioning, Cobb angle measurement, and lumbar sliding distance measurement). Meanwhile, the change of Cobb angle more than 11° was taken as the criterion of lumbar instability, and the lumbar sliding distance more than 3 mm was taken as the criterion of lumbar spondylolisthesis. The accuracy of surgeon annotation and Swin-PGNet in judging lumbar instability was compared. Results: ① Key point: The mean error of key point location by Swin-PGNet was (1.407±0.939) mm, and by different surgeons was (3.034±2.612) mm. ② Cobb angle: The mean error of Swin-PGNet was (2.062±1.352)° and the mean error of surgeons was (3.580±2.338)°. There was no significant difference between Swin-PGNet and surgeons (P>0.05), but there was a significant difference between different surgeons (P<0.05). ③ Lumbar sliding distance: The mean error of Swin-PGNet was (1.656±0.878) mm and the mean error of surgeons was (1.884±1.612) mm. There was no significant difference between Swin-PGNet and surgeons and between different surgeons (P>0.05). The accuracy of lumbar instability diagnosed by surgeons and Swin-PGNet was 75.3% and 84.0%, respectively. The accuracy of lumbar spondylolisthesis diagnosed by surgeons and Swin-PGNet was 70.7% and 71.3%, respectively. There was no significant difference between Swin-PGNet and surgeons, as well as between different surgeons (P>0.05). ④ Consistency of lumbar stability diagnosis: The ICC of Cobb angle among different surgeons was 0.913 [95%CI (0.898, 0.934)] (P<0.05), and the ICC of lumbar sliding distance was 0.741 [95%CI (0.729, 0.796)] (P<0.05). The result showed that the annotating of the three surgeons were consistent. The ICC of Cobb angle between Swin-PGNet and surgeons was 0.922 [95%CI (0.891, 0.938)] (P<0.05), and the ICC of lumbar sliding distance was 0.748 [95%CI(0.726, 0.783)] (P<0.05). The result showed that the annotating of Swin-PGNet were consistent with those of surgeons. Conclusion: The automatic diagnostic tool for lumbar instability constructed based on deep learning can realize the automatic identification of lumbar instability and spondylolisthesis accurately and conveniently, which can effectively assist clinical diagnosis.

Oblique lumbar interbody fusion combined with stress end plate augmentation and anterolateral screw fixation for degenerative lumbar spinal stenosis with osteoporosis: a matched-pair case-controlled study.

BACKGROUND CONTEXT: Oblique lumbar interbody fusion (OLIF) has been proven to be effective in treating degenerative lumbar spinal stenosis (DLSS). Whether OLIF is suitable for treating patients with DLSS with osteoporosis (OP) is still controversial. Bone cement augmentation is widely used to enhance the internal fixation strength of osteoporotic spines. However, the effectiveness of OLIF combined with bone cement stress end plate augmentation (SEA) and anterolateral screw fixation (AF) for DLSS with OP have not confirmed yet. PURPOSE: To evaluate the clinical, radiological, and functional outcomes of OLIF-AF versus OLIF-AF-SEA in the treatment of DLSS with OP. STUDY DESIGN: Retrospective case-control study. PATIENT SAMPLE: A total of 60 patients with OP managed for DLSS at L4-L5. OUTCOME MEASURES: Visual analog scale (VAS) score of the lower back and leg, Oswestry Disability Index (ODI), disk height (DH), lumbar lordosis (LL), segmental lordosis (SL), cage subsidence and fusion rate. METHODS: The study was performed as a retrospective matched-pair case‒controlled study. Patients with OP managed for DLSS at L4-L5 between October 2017 and June 2020 and completed at least 2 years of follow-up were included, which were 30 patients treated by OLIF-AF and 30 patients undergoing OLIF-AF-SEA. The demographics and radiographic data, fusion status and functional outcomes were therefore compared to evaluate the efficacy of the two approaches. RESULTS: Pain and disability improved similarly in both groups at the 24-month follow-up. However, the SEA group had lower pain and functional disability at 3 months postoperatively (p<.05). The mean postoperative disc height decrease (△DH) was significantly lower in the SEA group than in the control group (1.17±0.81 mm vs 2.89±2.03 mm; p<.001). There was no significant difference in lumbar lordosis (LL) or segmental lordosis (SL) between the groups preoperatively and 1 day postoperatively. However, a statistically significant difference was observed in SL and LL between the groups at 24 months postoperatively (p<.05). CS was observed in 4 cases (13.33%) in the SEA group and 17 cases (56.67%) in the control group (p<.001). A nonsignificant difference was observed in the fusion rate between the SEA and control groups (p=.347) at 24 months postoperatively. CONCLUSIONS: This study revealed that OLIF-AF-SEA was safe and effective in the treatment of DLSS with OP. Compared with OLIF-AF, OLIF-AF-SEA results in a minor postoperative disc height decrease, a lower rate of CS, better sagittal balance, and no adverse effect on interbody fusion.

The preoperative Hounsfield unit value at the position of the future screw insertion is a better predictor of screw loosening than other methods.

OBJECTIVE: Screw loosening is a widely reported issue after spinal screw fixation and triggers several complications after lumbar interbody fusion. Osteoporosis is an essential risk factor for screw loosening. Hounsfield units (HU) value is a credible indicator during bone mineral density (BMD) evaluation. As compared with the general evaluation of BMD, we hypothesized that specific measurements of HU at the precise location of the future screw insertion may be a better predictor of screw loosening. METHODS: Clinical data of 56 patients treated by oblique lumbar interbody fusion (OLIF) of the L4-L5 segments with an anterior lateral single rod (ALSR) screw fixation were reviewed in this study. Vertebral bodies with ≥ 1 mm width radiolucent zones around the screw were defined as screw loosening. HU in the insertional screw positions, the central transverse plane, and the average values of three and four planes were measured. Regression analyses identified independent risk factors for screw loosening separately. The area under the receiver operating characteristic curve (AUC) was computed to evaluate predictive performance. RESULTS: The local HU values were significantly lower in the loosening group, regardless of the selected measuring methods. The AUC of screw loosening prediction was higher in the insertional screw positions' HU than other frequently used methods. CONCLUSIONS: The HU value measured in the insertional screw position is a better predictor of ALSR screw loosening than other methods. The risk of screw loosening should be reduced by optimizing the trajectory of the screw based on the measurement of HU in preoperative CT. KEY POINTS: • Osteoporosis is an essential risk factor for screw loosening, and Hounsfield units (HU) are a credible predictor during bone mineral density (BMD) evaluation. • The HU value measured in the insertional screw position is a better predictor of screw loosening than other frequently used HU measurement methods. • The risk of screw loosening might potentially be reduced by optimizing the trajectory of the screw based on the measurement of HU in preoperative CT.

Clinical and radiological outcomes of n-HA/PA66 cages in anterior spine reconstruction following total en bloc spondylectomy for tumors.

Objective: This retrospective monocentric study was conducted to evaluate the clinical and radiological outcomes of the nano-hydroxyapatite/polyamide66 (n-HA/PA66) cage in reconstructing the anterior column of the spine following total en bloc spondylectomy (TES). Methods: A cohort of 24 patients, 20 diagnosed with primary malignant tumors and 4 with metastatic malignancies, was selected based on specific inclusion criteria. All were subjected to TES and anterior column reconstruction with the n-HA/PA66 cage from January 2013 to July 2023 at a single institution. Pre-operative embolization was performed on all patients. Documented factors included operation duration, intraoperative blood loss, length of hospital stay, treatment history, and involved level. Mechanical complications and radiological parameters such as the local kyphotic angle (LKA), anterior vertebral height (AVH), posterior vertebral height (PVH), cage subsidence, and bone fusion time were evaluated. Quality of life and neurological function were gauged using tools like the Visual Analog Scale (VAS), Eastern Cooperative Oncology Group (ECOG) performance score, Karnofsky Performance Score (KPS) scale, and American Spinal Injury Association (ASIA) grading. Results: All patients were followed up for 12-127 months, with an average period of 39.71 months. An average operation time of approximately 8.57 h and a blood loss volume of about 1,384 ml were recorded. No instances of tumor recurrence or multiple organ metastases were reported, though recurrence was detected in 2 living patients. Solid fusion was achieved in all patients at a mean time of 6.76 ± 0.69 months. Cage breakage or migration was not observed. Subsidence into the adjacent vertebral bodies was identified in 3 patients but was deemed clinically irrelevant. Significant improvements in VAS, ECOG performance score, KPS scale, and ASIA scores were noted from pre- to post-surgery (P < 0.05). A marked enhancement in the AVH was observed from before surgery to immediately after (P < 0.05). LKA, AVH, and PVH values between postoperative and final follow-up showed no significant variance (P > 0.05). Conclusion: The integration of TES and the n-HA/PA66 cage was found to yield promising clinical and radiological outcomes in anterior column spine reconstruction. The use of this material did not hinder oncological care, including the provision of adjuvant treatments (chemo/radiotherapy), ultimately contributing to the enhanced long-term quality of life for spinal tumor patients.

Stepwise reduction of bone mineral density increases the risk of cage subsidence in oblique lumbar interbody fusion patients biomechanically: an in-silico study.

BACKGROUND: Cage subsidence causes poor prognoses in patients treated by oblique lumbar interbody fusion (OLIF). Deterioration of the biomechanical environment initially triggers cage subsidence, and patients with low bone mineral density (BMD) suffer a higher risk of cage subsidence. However, whether low BMD increases the risk of cage subsidence by deteriorating the local biomechanical environment has not been clearly identified. METHODS: OLIF without additional fixation (stand-alone, S-A) and with different additional fixation devices (AFDs), including anterolateral single rod screws (ALSRs) and bilateral pedicle screws (BPSs) fixation, was simulated in the L4-L5 segment of a well-validated finite element model. The biomechanical effects of different BMDs were investigated by adjusting the material properties of bony structures. Biomechanical indicators related to cage subsidence were computed and recorded under different directional moments. RESULTS: Overall, low BMD triggers stress concentration in surgical segment, the highest equivalent stress can be observed in osteoporosis models under most loading conditions. Compared with the flexion-extension loading condition, this variation tendency was more pronounced under bending and rotation loading conditions. In addition, AFDs obviously reduced the stress concentration on both bony endplates and the OLIF cage, and the maximum stress on ALSRs was evidently higher than that on BPSs under almost all loading conditions. CONCLUSIONS: Stepwise reduction of BMD increases the risk of a poor local biomechanical environment in OLIF patients, and regular anti-osteoporosis therapy should be considered an effective method to biomechanically optimize the prognosis of OLIF patients.

Prevalence of Musculoskeletal Disorders and Their Associated Risk Factors among Furniture Manufacturing Workers in Guangdong, China: A Cross-Sectional Study.

OBJECTIVE: This study aims to investigate the one-year prevalence and the associated factors of work-related musculoskeletal disorders (WMSDs) among furniture manufacturing workers in Guangdong, China. METHODS: A cross-sectional study of 4181 (2953 males and 1228 females) furniture manufacturing workers was conducted between September 2019 and December 2019. All information about WMSDs was collected by the electronic version of Chinese Musculoskeletal Questionnaires (CMQ). Descriptive statistics and a binary logistic regression model were used to interpret the data. RESULT: The overall prevalence of WMSDs was 31.57%. The WMSD symptoms most commonly occurred in the neck (16.77%), followed by the shoulders (14.90%), ankles/feet (14.64%), hands/wrists (13.30%), upper back (11.48%), and lower back (10.95%). Multiple logistic regression analysis revealed that several individual, labor organization, and ergonomics-related factors conferred significant risks to WMSDs at different body sites. CONCLUSIONS: WMSDs remain the major occupational health problem for furniture manufacturing workers. Hence, some effective and feasible protective measures for furniture manufacturing workers are required in order to alleviate the health burden caused by WMSDs.

[Research progress of effect of cage height on outcomes of lumbar interbody fusion surgery].

Objective: To summarize the effect of cage height on outcomes of lumbar interbody fusion surgery and the importance of the cage height selection. Methods: The related literature was widely reviewed to summarize the research progress on the complications caused by inappropriate height of the cage and the methods of selecting cage height. Results: Inappropriate height of the cage can lead to endplate injury, cage subsidence, internal fixation failure, adjacent segmental degeneration, over-distraction related pain, insufficient indirect decompression, instability of operation segment, poor interbody fusion, poor sequence of spine, and cage displacement. At present, the selection of the cage height is based on the results of the intraoperative model test, which is reliable but high requirements for surgical experience and hard to standardize. Conclusion: The inappropriate height of the cage may have an adverse impact on the postoperative outcome of patients. It is important to develop a selection standard of the cage height by screening the related influential factors.

Spontaneous facet joint fusion in patients following oblique lateral lumbar interbody fusion combined with lateral single screw-rod fixation: prevalence, characteristics and significance.

PURPOSE: To explore the characteristics of spontaneous facet joint fusion (SFJF) in patients after oblique lateral lumbar interbody fusion combined with lateral single screw-rod fixation (OLIF-LSRF). METHODS: We randomly selected 300 patients from 723 patients treated with OLIF-LSRF into a cross-sectional study based on the pilot study results. A novel fusion classification system was designed to evaluate the fusion status of the facet joints at three time points. Ultimately, the prevalence, characteristics, and significance of SFJF were analyzed. RESULTS: A total of 265 (333 levels) qualified cases were included in our study. The novel classification for SFJF has excellent reliability (kappa > 0.75). The rate of SFJF was 15.20% (45/296 levels) at 3 months postoperatively, 31.34% (89/284 levels) at 6 months postoperatively, and 33.63% (112/333 levels) at the last follow-up. The circumferential fusion rate was 31.53% (105/333 levels) at the last follow-up. The location of SFJF was mostly on the right facet joint (P < 0.001), and the rate of SFJF increased significantly from 3 to 6 months after the operation (P < 0.001). The average age of patients with SFJF was older than that of patients without SFJF (P < 0.001). There was no significant difference in Visual Analog Scale or Oswestry Disability Index scores between patients with and without SFJF. CONCLUSION: In the OLIF-LSRF procedure, SFJF occurs mostly at 3-6 months postoperatively, especially in elderly patients and at the right facet joint. OLIF-LSRF has the potential for circumferential fusion.